Netopia 435 Reference Manual page 29

2-14 Netopia ISDN Router Reference Guide
Setting up Number to Dial
Setting up authentication
To enable NetBIOS Packet Forwarding, toggle the selection to
Yes.
Select Incoming Packet Filter Set, to attach a filter set for
filtering incoming packets and choose a filter set from the list.
Select Outgoing Packet Filter Set, to attach a filter set for
filtering outgoing packets and choose a filter set from the list.
Select Incoming SAP Filter Set,to attach a filter set for filtering
server entries within incoming Service Advertising Protocol
(SAP) packets and choose a filter set from the list.
Select Outgoing SAP Filter Set,to attach a filter set for filtering
server entries within outgoing Service Advertising Protocol
(SAP) packets and choose a filter set from the list.
Select Periodic RIP Timer, and enter a new value (in seconds)
to change the periodic RIP timers default value.
Select Periodic SAP Timer, and enter a new value (in seconds)
to change the periodic SAP timers default value.
Hit Escape to go back to the Add Connection Profile screen
when you are finished configuring IPX Profile Parameters.
For more information on creating an IPX filter set, go back to the
Advanced Configuration screen and select the Filter Sets (Firewalls)
screen. Also refer to Chapter 6. IPX Setup.
Select Number to Dial and enter the directory number (the
number of the ISDN line) of the network being called.
Select PPP/MP Options and go to the PPP/MP Options screen.
Point-to-Point Protocol (PPP) and Multilink Point-to-Point Protocol
(MP) allow the Netopia ISDN Router to make adaptable and