IBM ServeRAID-MR10is User Manual page 3

Vault sas/sata controller
Hide thumbs Also See for ServeRAID-MR10is:
Table of Contents

Advertisement

Audience
Organization
Preface
This book is the primary reference and user's guide for the ServeRAID-
MR10is SAS/SATA Controller. It contains installation instructions and
specifications for the adapter. In addition, it explains how to install and
use the intelligent Battery Backup Unit (iBBU) that is used with the
ServeRAID-MR10is controller.
For details on how to configure the controller, refer to the ServeRAID-
MR Software User's Guide. For information about the operating system
drivers, refer to the ServeRAID-MR Device Driver Installation User's
Guide.
This document assumes that you have some familiarity with RAID
controllers and related support devices. The people who benefit from this
book are:
Engineers who are designing a system that will include a
ServeRAID-MR10is SAS/SATA Controller.
Anyone installing a ServeRAID-MR10is SAS/SATA Controller in a
RAID system.
End users who need to install the iBBU products on the ServeRAID-
MR10is SAS/SATA Controller.
Engineers and managers who are evaluating iBBU products for
possible use with ServeRAID controllers.
This document has the following chapters and appendices:
ServeRAID-MR10is VAULT SAS/SATA Controller User's Guide
iii

Advertisement

Table of Contents
loading

Table of Contents