IBM ServeRAID-MR10is User Manual page 10

Chapter 3
ServeRAID-MR10is SAS/SATA Controller Characteristics
Chapter 4
Introduction to the Intelligent Backup Battery Unit
Chapter 5
Installing the Intelligent Battery Backup Unit Remotely
x
2.4 SAS Device Cables
2.4.1 Connecting the ServeRAID-MR10is SAS/SATA
Controller to Physical Drives
2.5 Replacing a Failed Controller Containing Data in the IBBU
2.6 After Installing the ServeRAID-MR10is Controller
3.1 ServeRAID-MR10is SAS/SATA Controller
3.2 ServeRAID-MR10is Controller Characteristics
3.3 Technical Specifications
3.3.1 Storage Adapter Specifications
3.3.2 Array Performance Features
3.3.3 Fault Tolerance
3.3.4 Electrical Characteristics
3.3.5 Operating and Non-operating Conditions
3.3.6 Safety Characteristics
3.4 Data Encryption
3.4.1 Support of Governmental Standards
3.4.2 Characteristics of Volume Encryption Keys and Security
Keys
3.4.3 Archiving Keys
3.4.4 Virtual Disk Migration
3.4.5 Modifying the Keys
3.4.6 Fault Handling and Recovery
4.1 Functionality
5.1 Installing the iBBU on the ServeRAID-MR10is Controller
5.2 Connecting the ServeRAID-MR10is iBBU Remotely
Contents
2-6
2-8
2-9
2-10
3-1
3-3
3-4
3-4
3-5
3-6
3-6
3-7
3-8
3-8
3-8
3-8
3-10
3-10
3-10
3-11
4-1
5-1
5-3