Schematic Diagram - Panasonic KX-TGE674 Service Manual

7 Schematic Diagram

7.1. For Schematic Diagram
7.1.1. Base Unit (Schematic Diagram (Base Unit_Main))
Notes:
1. DC voltage measurements are taken with voltmeter from the negative voltage line.
Important Safety Notice:
Components identified by
safety. When replacing any of these components, use only the manufacture's
specified parts.
2. The schematic diagrams may be modified at any time with the development of new technology.
7.1.2. Handset (Schematic Diagram (Handset_Main))
Notes:
1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.
mark have special characteristics important for
7
KX-TGE674/KX-TGEA61