Download Print this page

NETGEAR PA301 Installation Manual page 4

Netgear pa301 network card: installation guide
Hide thumbs Also See for PA301:

Advertisement

Connect the Telephone Cables
PC with network
card installed
Using the telephone cable provided in the NETGEAR package, connect one end
of the telephone cable to the port labeled "TO WALL" on the network card and
the other end of the cable to an available wall jack, as illustrated above.
Using the cable shipped with your telephone or modem, connect that cable to
the port labeled "TO PHONE" on the network card.
If you are using an external analog modem to connect to the Internet, refer to the
following illustration that shows the connections for the wall jack, Model PA301
Network card, external modem, and phone. Note that the captions on the modem
Card, network card, and modem direct you to the outlets where you connect the
cables.
Wall jack PC
Model PA310 Network Card Installation Guide
Phone line
PC with network
card installed
behind the
wall
RJ-11
connectors
Serial cable
External
modem
Telephone wire
Printer
(optional)
Telephone
9552FA
Phone
9571FB

Advertisement

loading