If you are installing more than one GA511 Gigabit CardBus Adapter, you must perform these steps
for each card.
Basic Installation Instructions
Use the procedure below for installation on a Windows XP, 2000, 98SE 2nd edition, or Me system.
F
,
IRST
INSTALL THE
Power on your notebook, let the
a.
operating system boot up completely,
and log in as needed.
Insert the NETGEAR Adapter Resource
b.
CD into your CD-ROM drive. The
Adapter Resource CD main page will
load.
From the Windows Start menu, select
c.
Run. The Run dialog box opens.
Enter the path to the GA511 setup.exe
d.
file on the CD. For example, if your
CD-ROM is drive D, enter
D:\GA511\setup
Then, click OK.
Follow the InstallShield Wizard steps,
e.
click Finish when done, and if prompted,
restart your computer.
Now, the GA511 driver and utility software
are installed.
Basic Setup
User Manual for the NETGEAR 10/100/1000 Mbps CardBus Adapter GA511
GA511
SOFTWARE
as the path.
.
Adapters Resource CD
Windows Start > Run
3-3