Troubleshooting - Panasonic ER-GP84 Operating Instructions Manual

Lubrication
• Apply the lubrication oil to the blade before and after
each use.
1
Remove the blade.
(See page 12.)
2
Apply a drop of the
lubrication oil to
each indicated point.
3
Attach the blade to the
main body, turn on the
power and allow to
run for approximately
5 seconds.
►Replacement parts
Replacement part is available at your dealer or Service
Centre.
Replacement parts for
ER‑GP84
• Using other than recommended genuine blade, any
warranty claim will expire.
• We recommend Panasonic lubrication oil WES003P.
14
Blade WER9920
Lubrication oil WES003P

Troubleshooting

Problem
The appliance has
become blunt.
Operating time is
short.
Appliance stopped
functioning.
The appliance
cannot be charged.
Makes a loud sound.
If the problems still cannot be solved, contact your
dealer or a service centre authorized by Panasonic for
repair.
Action
Until problems are solved,
please follow each procedure
as follows;
1. Charge the appliance.
(See page 10.)
2. Clean the blade and apply
lubrication oil.
(See pages 13 and 14.)
3. Replace the blade.
(See pages 12 and 14.)
4. Have the battery replaced by
an authorized service centre.
Push the main body into the
charging stand or appliance
plug all the way.
Charge within the
recommended charging
temperature of 10 °C to 35 °C.
Apply lubrication oil.
(See this page.)
Confirm that the blade is
properly attached.