Multiplexing Method and Virtual Circuit Number
Your ISP should give you information about the type of multiplexing used and the numbers for
the virtual circuits, if used.
Circle either:
VC-Based
or
Note: Use LLC-Based if your ISP did not give you a specific method.
VPI:
VCI:
Login Name
If your ISP requires a login name and password because you have a PPPoE or PPPoA account,
fill in the following:
Login name:
Password:
Service name:
Note: The login name could be called a user name or account name by your ISP.
The login name is case sensitive. You must type it exactly as given by your ISP. For
example, c_jones is a different login name than C_Jones or cjones.
Fixed (or Static) IP Address
If you have a static IP address through your ISP, fill in the following information:
Internet IP address:
Subnet mask:
Gateway IP address:
DNS server address information
If you were given specific Domain Name System (DNS) server addresses, fill in the following:
DNS Server IP address(es):
4
LLC-Based
.
.
.
.
(a number between 0 and 255)
(a number between 1 and 65535)
(may be your full e-mail address)
.
.
.
.
.
.
.
.
.
.
.
(if required by your ISP)
Note: For example,
169.254.141.148 could
be a valid IP address.