This chapter describes the features of the NETGEAR DM111P ADSL2+ Ethernet Modem, the
packaging list, and describes the connectors, LEDs, and pushbuttons on the front and rear panels. .
Note: If you are unfamiliar with networking and routing, refer to
and TCP/IP Addressing:" in Appendix B
and procedures used in this manual.
About the Modem
The modem provides an always-on Internet connection for home and office networks. The 24-
Mbps downstream and 1.5-Mbps upstream throughput delivers true broadband performance. The
modem is ideal for seting up your network with related NETGEAR routers, such as the 108 Mbps
Wireless Firewall Router (GT624) or the 54 Mbps Wireless Router (WGR614).
Key Features
The ADSL2+ Modem provides the following features:
•
Supports the full range of Asynchronous Digital Subscriber Line (ADSL) standards
•
Easy, Web-based setup for installation and management
•
Extensive Internet protocol support
•
10/100 Mbps auto sensing and Auto Uplink™ (Auto MDI-X feature that eliminates the need
for crossover cables) LAN Ethernet connections
These features are discussed below.
Introduction
to become more familiar with the terms
v1.0, August 2006
Chapter 1
Introduction
"Internet Networking
1-1