Page 2
BRIEF PROFILE An ISO 9001-2015 certified Instrumentation company (since 1972) serving Industries in India & Worldwide thro’ the Manufacture & Supply World-Class Calibration Instruments & Systems like Temperature, Pressure & Signal Calibrators, Black Body Calibration Sources, Pneumatic & Hydraulic Hand Pumps, Dead Weight & Comparison Testers, Calibration Test Benches, etc.
Page 3
Dear User, Thank you for selecting Nagman’s Hydraulic Hand Pump and becoming a proud owner of this Calibration Instrument. We have strived hard to ensure the accuracy of the contents of this manual. We would appreciate any suggestions/feedback to correct any errors noticed and to improve...
INTRODUCTION Nagman’s calibration hand pump is designed to manually generate pressure between 100 / 200 / 350 / 400 bar (depends on model). This pump is manufactured with high quality components for calibrating Analog / Digital gauges by comparison method. It can be used for lab and field applications.
3. STANDARD DELIVERY & OPTIONAL ACCESSORIES Standard Delivery Basic Pump Hydraulic Oil : 100 cc Cap for dust protection Set of Seals Conformance Certificate Hydraulic Hose with end fittings (Length : 1 Meter) Instruction Manual Optional Accessories ...
6. SAFETY INSTRUCTIONS S. No. Symbol Description Read the user manual before operating the instrument. Warning - conditions that may pose hazards to the user. Caution-conditions that may damage the instrument. Special Information NAG/IM/HHP 400/01/22...
Page 12
Do not release maximum pressure using Pressure release valve, but use fine adjustment valve to avoid damage to the instrument. Do not exceed maximum pressure indicated on pump label. It is not advisable to use hydraulic oil operated ...
Page 13
OPERATION – PRESSURE / VACUUM Remove reservoir filling plug (6) and fill reservoir (5) with the oil / water (whichever specified) up to the marked level and replace plug. Turn pressure release valve (2) fully closed in clockwise direction. Operate fine adjustment valve (3) &...
Page 14
Connect the test instrument to flexible hose/gauge adaptor and attach to pump through the quick-fit connection (4). Turn pressure release valve fully in anti-clockwise direction. Generate pressure by squeezing the pump handles together. Ensure selector position kept at Low and the handles ...
Pump servicing work should be carried out only by the manufacturer (Nagman). Chances are there that one of the seals in the HHP is leaking and needs to be replaced, if the applied pressure still cannot be developed.
Page 16
Parts are replaced / repaired using spare parts which are not identical to those recommended by the manufacturer. Nagman‘s liability is restricted to errors that originated from the factory. For more details, write to : NAGMAN INSTRUMENTS AND ELECTRONICS...