Support; General Specifications - Agilent Technologies N4972A Getting Started Manual

Getting Started

1.2 Support

1.3 General Specifications

Parameter
Connector type
All signals except 10
MHz Ref In/Out –
10 MHz Ref In/Out –
Remote control
interface
10
AC power cord
•
SMA male to SMA male cable (2)
•
o Connect one cable from the Jitter output of the N4972A to the
pattern generator clock input (or Ref CLK input of N4965A-CTR
(PCB12500))
o Connect the other cable from the N4972A Delay output to the
error detector clock input (or the Aux Clock input of the
N4965A-CTR (PCB12500))
CD-ROM, which includes:
•
o N4972A data sheet
o N4972A getting started guide
o N4972A user guide
For more information on the operation and features of the N4972A please
refer to the N4972A user guide on the CD or the product webpage
http://www.agilent.com/find/N4972A.
Technical Support information: http://www.agilent.com/find/assist.
Before installing the N4972A, review the specifications in Table 1.
Table 1. Specification considerations before installation
Specification
SMA
BNC
USB2.0 and IEEE-488 (GPIB)
Clock Synthesizer 16 GHz Getting Started Guide