Pppoe Smart Wizard-Detected Option - NETGEAR WGT634U Reference Manual

PPPoE Smart Wizard-Detected Option

If the Setup Smart Wizard discovers that your ISP uses PPPoE, you will see this menu:
Figure 3-7: Setup Smart Wizard menu for PPPoE accounts
• Enter the Account Name, Domain Name, Login, and Password as provided by your ISP. These
fields are case sensitive. The router will try to discover the domain automatically if you leave
the Domain Name blank. Otherwise, you may need to enter it manually.
• To change the login timeout, enter a new value in minutes. This determines how long the
router keeps the Internet connection active after there is no Internet activity from the LAN.
Entering a timeout value of zero means never log out.
Note: You no longer need to run the ISP's login program on your computer in order to access
the Internet. When you start an Internet application, your router will automatically log you in.
• If you know that your ISP does not automatically transmit DNS addresses to the router during
login, select "Use these DNS servers" and enter the IP address of your ISP's Primary DNS
Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter DNS addresses, restart your computers so that these settings take effect.
• Click Apply to save your settings.
• Click Test to verify that your Internet connection works. If the NETGEAR Web site does not
appear within one minute, refer to
Connecting the Router to the Internet
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Chapter 9,
April 2004, 202-10018-02
"Troubleshooting".
3-11