Beko B3T47238 User Manual page 31

The lighting inside the drying machine does not turn on1 In models with lamp
The drying machine might not have been turned on using On2Off button1 >>> Check that the drying
machine is turned on1
Lamp might be malfunctioning1 >>> Contact Authorized Service to replace the lamp1
Wrinkle prevention icon or light is lit1
Anti6Crease mode that prevents the laundry in the drier to crease may be activated1 >>> Turn the drier
off and remove the laundry
Fibre filter cleaning icon is lit1
Fibre filter interior and exterior filter may be unclean1 >>> Wash the filters with warm water and dry11
A layer may be formed on the fibre filter pores that leads to clogging1 >>> Wash the filters with warm
water and dry1
A layer that may cause clogging of the pores of the fibre filters internal and external filters may have
occurred1<<Wash and dry the filters with lukewarm water>>
Fibre filters may not be inserted1 >>> Insert the interior and exterior filters to their places1
2nvironmentally6friendly filter cloth may not be installed on the plastic part and the front of the condenser
may have clogged1>>>Install the environmentally6friendly filter to the plastic part and place it on the filter
housing1
2nvironmentally6friendly filter may have not been replaced although the warning
symbol is illuminated1 "Replace your filter1"
An audible warning is heard from the machine
Fibre filters may not be inserted1 >>> Insert the interior and exterior filters to their places1
Filters of the machine may not have been installed1>>> Install the fibre filters internal and external or the
environmentally6friendly filter to their housing1
Condenser warning icon is flashing1
Condenser front side may be clogged with fibres1 >>> Clean the front side of the condenser1
Fibre filters may not be inserted1 >>> Insert the interior and exterior filters to their places1
The lighting inside the drying machine turns on1 In models with lamp
If the drying machine is plugged to the power outlet, the On2Off button is pressed and the door is open;
the light turns on1 >>> Unplug the drying machine or bring the On2Off button to Off position1
Wifi icon flashes continuously1 for models featuringHomeWhiz Function
>>> The product may not be connected to the wireless network1 Follow the instructions to connect
to the network1 The device which the product utilize to connect to network may be faulty1 Check it1The
product may not be connecting to the network due to proximity1
If you see the "F L t" message on the screen, please follow the steps below1
Filters may be dirty1 Clean internal and external filters or replace the eco6friendly filter1
If you use double filter, as an internal and external filter, on the cover area, ensure that both filters are
installed1
If you use the eco6friendly filter feature, ensure that the filter cloth is installed to the plastic part1 Install
the filter cloth to the plastic part if it is not installed1
The are in front of the condenser may be dirty1 Open and inspect the toe board area and ensure that it is
clean1 Refer to the Maintenance and Cleaning section1
If the problem persists after following the instructions in this section, contact your vendor or an
Authorized Service1 9ever try to repair your product yourself1
If you experience any issue with your device, you can request a replacement by consulting to
the nearest authorised service with the device model number1
Dryer / User manual
1
-