MARUTI SUZUKI ALTO K10 2023 Owner's Manual & Service Booklet page 156

OTHER CONTROLS AND EQUIPMENT
Vehicle alerts setting
You can turn on or off the warning indica-
tions related to vehicle system using this
setting. By default, this setting is ON for all
alerts.
1) Turn "TUNE/FLD" knob (6) to select
"Vehicle Alerts", and press the knob (6)
to determine the selection.
2) Turn "TUNE/FLD" knob (6) to select
one of the settings as follows, and
press the knob (6) to determine the
selection.
Parking Brake Engaged
Seat Belt Open
Door Open
Low Fuel
3) Press "TUNE/FLD" knob (6) to select
"ON" or "OFF".
4) Following are the warning display
related to vehicle system:
• "Parking Brake Engaged":
This message will appear when the vehi-
cle is moved without releasing the park-
ing brake. Check that parking brake is
fully released.
• "Seat Belt Open":
This message will appear when the vehi-
cle is moving and driver has not fas-
tened his seat belt.
5-23
• "Door Open":
This message will appear when any door
(except tailgate) is open when the vehi-
cle is moving.
• "Low Fuel":
This message will appear to remind to fill
the fuel. Fill the fuel immediately.
NOTE:
If you push "DISP/BACK" button (4) while
the warning and indicator messages is dis-
played, the indication will disappear.
Reverse warning priority setting
On applying reverse, volume of audio sys-
tem gets lowered. By default, this setting is
ON. This setting can be turned on or off
through the following steps:
1) Turn "TUNE/FLD" knob (6) to select
"Reverse Warning Priority", and press
the knob (6) to determine the selection.
2) Turn "TUNE/FLD" knob (6) to select
"No" or "Yes", and press the knob (6) to
determine the selection.
Auto scroll setting
Auto scroll setting is ON by default.
When playing the media files, if the files
text contains more characters, ">" mark will
appear at the right end up the display
screen and the display changes to the next
set of characters automatically.
1) Turn "TUNE/FLD" knob (6) to select
"Auto Scroll".
2) Press "TUNE/FLD" knob (6) to select
"ON" or "OFF".
RDS (Radio Data System) setting
Enabling this setting displays the mes-
sages transmitted by FM station. This set-
ting is ON by default. You can choose to
turn ON/OFF this setting through the fol-
lowing steps:
1) Turn "TUNE/FLD" knob (6) to select
"RDS".
2) Press "TUNE/FLD" knob (6) to select
"ON" or "OFF".
NOTE:
• Messages are displayed only when RDS
signal is included in FM radio waves.
• The messages are displayed program
service name only.
Smartphone app setting
Refer to section 5-49 for details about
smartphone application.
Smartphone app can be used only when
app setting is enable as ON.
Refer to "Suzuki Smartplay Dock applica-
tion" later in this section for details.
1) Turn "TUNE/FLD" knob (6) to select
"SmartPhone APP".
2) Press "TUNE/FLD" knob (6) to select
"ON" or "OFF".
NOTE:
An Apple device can be connected in
either Bluetooth® or iPod mode. Blue-
tooth® mode has higher priority over iPod
Mode. In case, you want to connect the
Apple device on iPod mode instead and
change Smartphone app setting to "OFF".