Table of Contents
Advertisement
Programme default settings
en
Programme/Type of washing
- Quick 15 min
Extra-short programme of approx. 15 minutes, suitable for
small items of lightly soiled laundry.
*
Depending on the model and the programme.
** Reduced load with G SpeedPerfect additional programme setting.
0
Programme default
settings
Y ou can change the default settings for
P r o g r a m m e d e f a u l t s e t t i n g s
selected programmes. The settings can
be changed even while the selected
programme is running. The effects
depending on the progress of the
programme.
6 Temp. °C
Before and after the programme starts,
you can change the temperature
setting, depending on what stage the
programme is in, by adjusting the
desired temperature on the display.
The maximum temperature that can be
set depends on the programme that has
been selected.
0 Spin
Depending on what stage the
programme is in, you can change the
spin speed (in rpm; revolutions per
minute) before and during the
programme by adjusting the desired
speed on the display.
30
Options/Information
2.0 kg
— - 40 °C
400 - 1000 rpm
Ï Extra Rinse, S Silent Wash
possible
setting 2: 2 ="No spin". The rinsing
water is drained but there is no final
spin. The laundry stays wet inside the
drum, e.g. for items that should not be
spun.
You can select "No spin" to prevent
creasing if the laundry will not be taken
out of the appliance immediately after
the programme has ended.
The maximum speed that can be set
depending on the model and the
programme that has been selected.
ñ Ready in
Before starting the programme, you
can preselect the programme end
("Finish in" time) in 0.5h (h = hour)
increments (between "minimum
selectable ending time" and 9.5h) or 1
hour increments (between 10h and
24h) up to a maximum of 24 hours.
To do this:
Select a programme (except
1.
programme).
*
myTime
The programme duration is
displayed for the selected
programme, e.g. 2:30
(hours:minutes).
Select the ñ Ready in button
2.
repeatedly until the required number
of hours is displayed.
*
Depending on the model
Advertisement
Table of Contents
