Auxiliary Function Selection; Starting The Programme; Child Lock - Beko WTV 7501BW0 User Manual

5.10 Auxiliary function selection

Use the following auxiliary functions according to your
daily needs. Select the desired auxiliary functions before
starting the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button when
the machine is operating. For this, the machine must be in
a step before the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn
the user.
C
Some functions cannot be selected together. If a
second auxiliary function conflicting with the first
one is selected before starting the machine, the
function selected first will be canceled and the
second auxiliary function selection will remain
active. For example, if you want to select Quick
Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will
remain active.
C
An auxiliary function that is not compatible
with the programme cannot be selected. (See
"Programme and consumption table")
C
Auxiliary Function buttons may vary according to
the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for
tulle and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
Delayed Start (In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
1. Open the loading door, place the laundry and put
detergent, etc.
2. Select the washing programme, temperature, spin speed
and, if required, the auxiliary functions.
3. Set the desired time by pressing the Delayed Start button.
When the button is pressed once, 3 hours delayed start
is selected. When the same button is pressed again,
6 hours delay is selected, and when it is pressed for
the third time, 9 hours delayed start is selected. If you
press the Delayed Start button once again, Delayed Start
15 / EN
function will be canceled.
4. Press Start / Pause button. Previous delayed start time
light turns off and next delayed start time light turns on
after every 3 hours.
5. At the end of the countdown, all delayed start lights will
turn off and the selected programme will start.
C
Additional laundry may be loaded during the
delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is pressed,
the period will change in 3-hour increments and the light of
the selected delayed start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
1. Set the Delayed Start period to zero (all delayed start
period lights will turn off) or turn the Programme Selection
knob to any programme. Thus, Delayed Start function will
be canceled. The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.

5.11 Starting the programme

1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the
programme will turn on.
C
If no programme is started or no key is pressed
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators will
turn off. Once the Programme Selection knob is
rotated or any button is pressed, indicator lights
and indicators will turn on again.

5.12 Child Lock

Use child lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
C
If the Programme Selection knob is turned when
the Child Lock is active, "Con" appears on the
display. The Child Lock does not allow any change
in the programmes and the selected temperature,
speed and auxiliary functions.
C
Even if another programme is selected with the
Programme Selection knob while the Child Lock
is active, previously selected programme will
continue running.
C
When the Child Lock is active and the machine
is running, you can switch the machine to Pause
mode without deactivating the Child Lock by
turning the Programme Selection knob to On / Off
position. When you turn the Programme Selection
knob afterwards, the programme will resu
Washing Machine / User's Manual