Advertisement
Quick Links
Advertisement
Related Manuals for UNI-T UTi120Mobile
Summary of Contents for UNI-T UTi120Mobile
- Page 1 UT i120Mobile Thermal Imager for Smart Phone P/N:110401110192X...
-
Page 2: Limited Warranty And Liability
UT i120Mobile User Manual Preface Thank you for purchasing this brand new UTi120Mobile Smart Phone Thermal Camera. In order to use this product safely and correctly, please read this manual thoroughly, especially the safety notes. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference. -
Page 3: Specifications
UT i120Mobile User Manual UT i120Mobile User Manual Table of Contents 1. Specifications IR resolution 120×90 ≤25Hz Output frame rate Response wave band 8-14μm Pixel size 17 m μ ＜60mK NETD Field of view (FOV) 50° H ×38° V Focusing mode Focus-free Central point/highest temperature/ Measurement... - Page 4 "Photos" and "Setting" pages, but other functions are unavailable. Insert (Picture-in-Picture) camera image and infrared image the product into a smart phone, a prompt "Open UTi120Mobile to process the UNIT Applicationl Device?" will pop up. Click OK to connect to the High/low temperature...
- Page 5 UT i120Mobile User Manual UT i120Mobile User Manual 3. Display 4. Photos The initial state of the device after startup is shown in Figure 3 below. After opening the APP, click on Photos (No.4 in Figure 3) to enter the The palette is Iron Red by default, and the main page is divided into...
- Page 6 UT i120Mobile User Manual UT i120Mobile User Manual 4.2 View (Figure 6) Click on a photo to enter the viewing interface, and users can perform functions such as Share/PiP/Delete/Blending/Edit. Click "Delete", and it will prompt "Delete this file?” Select "YES" to delete the photo and return to the photo interface.
- Page 7 Therefore, it is not recommended to perform the blending function when using a Type-C extension cable. The infrared thermal imaging photos taken by UTi120Mobile App can be edited while viewing. The specific editing operations are as follows: 1) Rotate the photo: click the icon to change the photo direction.
- Page 8 UT i120Mobile User Manual UT i120Mobile User Manual 6. Add Analysis Objects 3) Brush: click the icon , the following interface will appear . Users can mark a photo in different colors. Click to withdraw the previous Click the icon to enter the interface for adding analysis objects, as operation, after clicking "Finish", enter the interface again, click shown in the figure below.
- Page 9 UT i120Mobile User Manual UT i120Mobile User Manual 6.4 Delete Selected Analysis Objects 6.1 Point Clicking the icon can delete the selected temperature analysis Clicking the icon can add a point temperature analysis object and object. expand a semi-transparent information bar on the right side of the interface to display the temperature information of the analysis objects.
- Page 10 UT i120Mobile User Manual UT i120Mobile User Manual 8.3 Temperature Mark 8.1 Language Users can set Max Temp Mark, Min Temp Mark and Center Mark. After Users can select the language according to their needs. The APP turning on these marks, the main interface will display the corresponding currently supports Chinese (default) and English.
- Page 11 UT i120Mobile User Manual UT i120Mobile User Manual 8.4 Temperature Alarm If the Temperature Alarm is turned on, but the corresponding temperature Users can set Temperature Alarm Max and Temperature Alarm Min. value is not set, a prompt "The temperature setting is wrong. Please After setting, when the temperature exceeds the Temperature Alarm check!"...
- Page 12 UT i120Mobile User Manual UT i120Mobile User Manual 8.6 Distance 8.8 About The default distance is 0.6m. Users can adjust it according to their It includes the APP Version and the Model Version. requirements. 9. Switch Photo/Video Function Slide the camera button left/right to switch between taking photos/ 8.7 Help videos.
-
Page 13: Switch Camera
UT i120Mobile User Manual UT i120Mobile User Manual 2) Clicking the cross cursor can manually call the shutter. 10. Start/End Taking Photos/Videos Slide the camera button left/right to enter the recording mode. Click 14. Notes the recording button to start recording, and the recording duration will The App will automatically call the shutter according to the temperature be displayed on the top. - Page 14 尺 寸 ：1 00*8 0 mm UTi120Mobile P/N:110401110192X...