15.Emissivity--------------------------------------------------------------------------------------------------------------------------- 13 description enclosed. This warranty is the only compensation you can obtain. Meanwhile, Uni-T rend will not be 16.Auto Power Off-------------------------------------------------------------------------------------------------------------------- 13 responsible for any special incidental for indirect damage or loss that is caused by any reason or speculation.
Page 3
User Manual User Manual 1.Technical Specification Thermal imaging sensitivity 150mk UT i80 T echnical Specification Frame rate ≦9Hz Infrared temperature measurement Save image format BMP (320x240) Temperature range 30 400 -22 752℉) ℃( General parameters -30 0 : ±3 ℃ ℃...
User Manual User Manual 4.Power On/Off Long press the Power button over 3 seconds to Power on, Long press the Power button over 3 seconds again to Power off. 5.Menu Introduction M ai n m enu: 1.Press OK button to pop-up the main menu.
9.Temperature of Center Point Position and Heat/Cold detection UTi80 blends the daylight and thermal image and displays them together. The temperature of the target area will be The steps to capture the temperature of center point position are as follows: displayed on the LCD screen.
User Manual User Manual 10.Color palette The steps to select color are as follows: 1.Press OK button to pop-up the main menu. 2.Use the left / right button to select sub menu. 3.Press the OK button to pop-up Hot iron, Rainbow and Gray scale options 4.Use the left / right button to select desired color.
User Manual User Manual The steps to delete the photo are as follows: 13.Language Setting 1.Enter Photograph Playback sub menu. 2.Press OK button to pop-up and sub menu. The steps to setup Language are as follows: 3.Use the left /right arrow button to select option , 1.Press the OK button to pop-up the main menu.
User Manual User Manual 17.Display Brightness 15.Emissivity The steps to set up Display Brightness are as follows: The steps to setup emissivity are as follows: 1.Press the OK button to pop-up the main menu. 1.Press the OK button to pop-up the main menu, 2.Use the left or right arrow button to select potion.
User Manual User Manual 19.High/Low Temperature Alert Setting 21.Restore Setting The steps to Restore Setting are as follows: The steps to set up High/ Low Temperature Alert are as follows: 1.Press the OK button to pop-up the main menu, 1.Press the OK button to pop-up the main menu, 2.Use the left or right arrow button to select potion.
It is recommended that the measuring distance should be less than 75% of the theoretical value. Dual wavelength laser pointer: Uti80 adopts the dual laser pointer that helps user to quickly confirm the area to be measured.
User Manual User Manual 25.Maintenance Use a wet cloth or a weak soap solution to clean the outer shell of the device. Do not use the grinding agent, isopropyl alcohol or solvent to clean the lens and window. 26.Safety Instructions In order to ensure accurate measurement results, please read the instructions carefully.