Table of Contents
Advertisement
Microphone Signal Flow
• MIC is enable by MICBIAS
• MICBIAS, MICP, MICN signals to ABB
Trouble Shooting Setup
• Initialize GSM MS test equipment.
• Connect PIF-UNION to the phone, and power on.
• Make a test call to 112.
• Make a sound in front of the microphone
Trouble Shooting Procedure
• Check the bias of the microphone.
• Check the audio signal path.
• Check the soldering.
• Check the microphone.
• Check the operation of FPCB
MICP
MICN
Check Points
The waveforms at MICP and MICN
-66-
• Microphone bias
• Audio signal level of the microphone
• Soldering of components
• Connection of FPCB
MICP
MICN
MIC Bias
R116
MICP
MICN
AC voltages
of the signals
MIC Bias
C325
Advertisement
Table of Contents
