Advertisement
Charging | Glowing Red |
Optimally Charged (> 90%) | Solid Green |
Fully Charged | LED Off |
Low | Blinking Red |
Medium | Solid Yellow |
High | Solid Green |
Charging | Glowing Red |
Optimally Charged (> 90%) | Solid Green |
Fully Charged | LED Off |
Disconnected | Blinking Blue |
Bluetooth® Pairing | Blinking Red and Blue |
Charging | Glowing Red (In Charging Case) |
Note: Tap and hold either earbud for 6s to enter Bluetooth Pairing mode
Gently push and wiggle the earbuds into the respective ear canal until a good seal is made to ensure proper fitting. Additional pairs of silicone tips are also provided so users could achieve an optimal fit.
Earbuds will blink once in blue in charging case when Master Reset is initiated. Master Reset is reserved for cases where users encounter issues while earbuds are in use or during situations such as: Bluetooth Pairing failure, random LED blinking, failure to pair secondary earbud with the main earbud, or to reset all data.
SUMMARY:
This article highlights a phenomena and recommendation for music cutting out and earbuds that do not stay connected.
When pairing a smart mobile device with TWS (True Wireless Stereo) earbuds, the signal is strongest when there is a line-of-sight between the pairing devices.
If the signal passes through the body, which is mostly made up of water fluid, it may get absorbed, which may result in pairing difficulty. If the mobile device is already connected to the TWS earbuds, it may result in signal lost or the earbuds may get disconnected.
Therefore, it is recommended to place the smart mobile device on the same side as the main connected earbud; thereby bypassing the body barrier. For example, left earbud is paired as the main connected earbud, the smart mobile device should be placed in the left pocket of your pants and vice versa.
Please visit creative.com/compliance/outlierairv2 for the user guide, safety and regulatory information, ErP information where applicable and battery removal instruction which is meant strictly for independently qualified professional.
Please visit creative.com/support/outlierairv2 for all other support related to your product.
Headphones Drivers
Microphones
Interface
Bluetooth Profiles
Wireless Operating Range
Battery
Input
Total Playtime
Charging Time
Audio Codec
Operating Temperature
FCC ID: 2AJIV-EF0910LR
Note: Compliance markings are located at the bottom of the product
© 2020 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. Siri is a trademark of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown. Use of this product is subject to a limited warranty.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download CREATIVE OUTLIER AIR V2, OUTLIER AIR SPORTS V2, EF0900 Quick Start
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the OUTLIER AIR V2 that isn't answered in the manual? Leave your question here.