Notification Signal; Altering The Appliance Settings - Bosch WTR87641ES Installation And Operating Instructions Manual

Appliance settings
en

Notification signal

You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press (Signal) C.
C is shown/hidden in the display.
The notification signal at the end of
programme is activated/deactivated.
If a signal does not sound when
Note:
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
~ Page 32

Altering the appliance settings

You can call up and change the
following appliance settings:
Volume of the audible notification
■
signals (e.g. at the end of a
programme)
Volume of the audible operating
■
signals
Spin speed used for spinning the
■
laundry before drying
Call up and change the appliance
settings as follows:
Set the programme to position 1.
1.
Press and hold Inicio/Pausa (Start/
2.
Pause) A. At the same time:
32
Set the programme to position 2.
3.
Release Inicio/Pausa (Start/Pause)
4.
A.
You can now alter the appliance
settings.
Adjusting the volume of the audible
notification signals
You can adjust the volume of the
notification signal emitted at the end of
the programme.
Adjust the appliance setting as
follows:
Set the programme to position 3.
1.
The current setting will appear on the
display.
Press Duración (Drying Time) 5
2.
or Terminado en (Ready in)ñ until
the required setting appears on the
display.