Advertisement
Ironing chart
Fabric
Temperature setting
●
Acrylic
Acetate
●
Nylon & Polyester
●
Rayon
●
Viscose
●
Silk
●●
Cotton blends
●●
Wool &
●●
wool blends
Cotton
●●
Corduroy
●●●
Linen
to "max"
●●●
to "max"
Denim
●●●
Varied ironing speed and fabric dampness might cause optimal setting to differ from that
recommended in the table!
10
Ironing recommendation
Dry iron on wrong side.
Dry iron on wrong side while still damp or use
spray to dampen.
Iron on wrong side while still damp or use spray
to dampen.
Iron on wrong side of fabric.
Mainly dry iron. Steam can be used under
manufacturer's instructions.
Iron on wrong side. Use an ironing cloth to
prevent shine marks.
Check label and follow manufacturer's
instructions. Use setting fo the fibre
requiring lowest setting.
Steam iron on wrong side or use ironing cloth.
Dry iron while still damp or use spray to
dampen. Use steam medium to high.
Steam iron on wrong side or use ironing cloth.
Iron on wrong side or use ironing cloth to
prevent shine marks, especially with dark
colours. Dry iron while still damp or use spray to
dampen. Use steam medium to high.
Use maximum steam.
Getting started
1. Before first use.
Remove all adhesive remains and gently rub
with a dampened cloth. Rinse water tank to
remove foreign particles. When turned on
for the fi rst time, temporary
vapours/odours may occur.
2. Filling steam iron with water.
Make sure plug is removed from power outlet.
Turn steam selector to Dry setting and open
fi lling aperture cover. Using beaker
provided, pour water up to maximum level.
Close cover.
3. Plug power cable into a power outlet.
Power indicator light turns on. Set
temperature by turning temperature
selector to adequate choice. When the light
turns off , iron is ready to be used.
maximumniveau. Sluit het klepje.
4. Using the spray mist and steam jet
function.
Ensure that water tank is at least 1/4 full. Use
spray mist to pre-dampen fabrics by
pressing spray button several times to
release a fine mist (A). To use the steam jet
function, ensure that tank is at least 1/2 full.
Press steam jet button several times to
prime pump (B).
11
Advertisement
