Download Print this page

Ironing Chart; Temperature Setting - Electrolux RENEW 800 Instruction Book

Hide thumbs Also See for RENEW 800:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
12
Always store the power cord in the power cord storage (S) and the steam hose in the steam hose
storage (L) on the steam station base.
Warning! NEVER wind the power cord around the iron.
CLEANING
13
DO NOT OPEN WHEN HOT! Allow to cool-down for 2 hours. Turn the station base to the side so
that the boiler cap is uppermost. Unscrew the boiler cap. Turn the appliance side over a sink and
completely empty the boiler.
14
Mix a descaler agent and water at the specified ratio, prepare at least 300ml descaler mixture. (Use the
recommended ratio for the mixture. If there is much scaling, properly increase the proportion of descaler.)
Note: Please follow the water/descaler liquid ratio instructions on the bottle.
In areas with medium water hardness, we recommend to descale the product every 2 months, while
in areas with very hard water, we recommend to descale every 1 month or after 10 ironing sessions.
15
Pour out the mixture. Fill the boiler with clean water, then pour it out. Repeat this step for several
times until the scale is removed and there is no longer a descaler smell. Place back one measuring
cup of clean water in the boiler before reassembling.
THE WARRANTY DOES NOT COVER DAMAGE CAUSED BY CLOGGING DUE TO LIME. Once cleaning is
done, do not keep the boiler completely empty but leave some water still there (before closing it again).
Insert the cleaning brush* into the boiler opening and clean-out water remnants and lime residues
16
while holding the appliance over a sink. (*Certain models only).
17
Clean the appliance with a slightly damp cloth. To remove stubborn stains, you may apply a small
amount of non-abrasive cleaner.
18
Turn off headlight by pressing both "Linen" and "Outdoor" for 1 second.
Enjoy your new Electrolux product!

IRONING CHART

FABRIC
Acrylic
Acetate
Nylon & Polyester
Rayon
Viscose
Silk
Cotton blends
Water-repellent
breathable fabrics
(excluding PVC-
coatings)
Wool & Wool blends
Cotton
Corduroy
Linen
www.electrolux.com
TEMPERATURE
IRONING RECOMMENDATION
SETTING
Outdoor
Dry iron inside out.
Outdoor
Dry iron inside out while still damp or use spray to
dampen.
Outdoor
Iron inside out while still damp or use spray to dampen.
Outdoor
Iron inside out.
Outdoor
Iron inside out.
Outdoor
Iron inside out. Use an ironing cloth to prevent shiny iron
marks.
Outdoor
Check the label and follow the manufacturer's
instructions. Outdoor setting is recommended for this
kind of fiber.
Outdoor
Gently wash and air dry your outdoor garments
according their care label instructions. Carefully and
slowly dry iron the outside to reach all parts of your
garment in order to reactivate the DWR (Durable Water
Repellency) treatment and restore the water repellency
of your outdoor garments, which is better than air drying
only.
Wool
Steam iron inside out or use ironing cloth.
Cotton
Dry iron while still damp or use spray to dampen. Use
maximum steam.
Cotton
Steam iron inside out or use ironing cloth.
Cotton or
Iron inside out or use ironing cloth to prevent shiny iron
Linen
marks, especially with dark-colored fabrics. Dry iron
while still damp or use spray to dampen. Use maximum
steam.
EN
CNS
CNT
KR
ID
TH
VN
7

Advertisement

loading

This manual is also suitable for:

E8ss1-80gm