Table of Contents
Advertisement
10. Customer service
Before notifying customer service, please check the
following:
Are location and ventilation satisfactory?
Does the appliance stand evenly?
Is there a current in the wall socket and is the
connection suitable for the appliance?
Is the mains power cable damaged?
For mains operation, is the electric thermostat
swiched on?
For gas operation, was the safety valve knob
pressed down long enough?
Is the safety valve knob set towards the large
flame symbol?
Is the gas cylinder or the pressure regulator valve
open?
Is there any gas in the cylinder? (If by shaking, no
liquid movement can be detected, then the
cylinder is empty.)
Are by any chance two different power sources
connected (such as gas or electricity)?
Was warm food placed in the unit?
Was a large quantity of food put in at one time?
If after checking the above, the appliance still does
not operate properly, contact customer service. When
reporting the problem, state the type of problem, the
type of appliance, and the product number and serial
number from the data plate.
We assume the warranty in accordance with our
warranty assumptions for the appliance.
11. Putting into operation
You must, in all instances, operate the
appliance from a single energy source only.
Connecting several energy sources at the same time
will cause failure of the appliance.
Technical data:
Model
Type
Gross volume
Mains operation
Input
Energy consumption
Battery operation
Input
Energy consumption
Gas pressure (p)
Gas classification
Jet size
Climate class
Refrigerant
RC 3000
JCB 4
35 litre
220 - 240V (AC)
80W
1.4 kWh/24h
12V (DC)
80W
160Ah/24h
30 mbar
I
3 B/P
19
N
370g NH
+ H
O
3
2
11.1 Connecting to electrical mains
Make sure no other energy source is connected
(gas, 12V).
The appliance may only be operated from
nominal voltage mains as shown on the data
plate. The appliance mains plug may be connected
to a mains socket earthed in accordance with
regulations.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity
supply voltage is the same as that indicated on the
appliance rating plate.
9
Advertisement
Table of Contents
