S
ETUP
Using the Reader
Using the
Reader
Conducting a
Contactless
Transaction
NOTE
16
UX400 CTLS R
EADER
The contactless reader is only active when signaled by an application for the
conduction of a contactless card transaction.
When active, the device's contactless logo lights up.
To conduct a contactless transaction, hold the card (within 4 cm) or gently tap
against the surface of the contactless antenna, marked by the logo
The contactless unit uses various audible and visual confirmations to confirm
transactions.
The actual audible and visual confirmations may vary depending on regional and
customer requirements.
Conducting a Contactless Transaction
Figure 5
I
G
NSTALLATION
UIDE
.