Connection Examples - ABB INCA 1EC Tina Manual

5.1

Connection examples

INCA 1 Tina v2
Three INCA 1 Tina with static information output connected to the DYNlink safety circuit
monitored by a safety controller or a safety PLC. When a safety PLC is used the status of each
individual INCA unit can be monitored on separate PLC ports.
INCA 1EC Tina
Three INCA 1EC Tina with StatusBus connected to the DYNlink safety circuit monitored by a
safety PLC. The status of each individual INCA 1EC Tina unit can be monitored with a single
PLC port in a controller having a StatusBus master.
2TLC172163M0201 Rev.F
9