TERASAKI TemBreak PRO Instruction Manual

Breaker-Mounted External Operating Handle
Instruction Manual
(Type): TPHB63S
This device allows the breaker installed in a motor
control center or switchboard to be operated manually
without the need for opening the panel of the motor
control center or switchboard.
Please retain this manual for future reference. The Manufacturer assumes no responsibility for
damages resulting from non-application or incorrect application of the instructions provided herein.
6-13-47 Kamihigashi, Hiranoku, Osaka
〒547-0002
547-0002, Japan
大阪市平野区加美東6–13–47
TEL 06–6791–2756 TEL +81-6-6791-2763
FAX 06–6791–2732 FAX +81-6-6791-2732
https://www.terasaki.co.jp
https://www.terasaki.co.jp
kiki-info@terasaki.co.jp int-sales@terasaki.co.jp
2G1429SAB KRB-0951b
The Mounting Direction Changing Procedure
No.2
Handle catch
Rotate the handle until the screw head is
visible at the handle catch.
Lock adjustment plate a (Metal)
Lock adjustment plate b (Plastic)
For overseas specifications
Packaged Items
Panel plate Hook holder
M4 14 - 4pcs. 3
Flat head screws black Nut holder (for 3 poles)
M5 16- 4pcs.
Pan head screws
Gasket for dust protection optional
Orient the lock adjustment plate depending on the changes in breaker mounting direction. When
changing the handle to the left power supply type, for example, select orientation "B" from the table
shown below.
Lock adjustment plate orientations
for Upper power for Left power
supply type supply type
Mounting direction
Specifications
A B
a
Japanese
a
Specifications
Standard
Lock adjustment plate A B
orientations
b
Overseas
a
a
Specifications
Standard
Applicable Breaker Types
Handle type
PS400- , PS630-
TPHB63S
P400 , P630
Assembly Tools
Handle
4.5 50
4pcs. 2pcs.
Nut holder (for 4 pole side)
Safety Notices
Be sure to read these Instructions and other associated documents accompanying the product
thoroughly to be familiarize yourself with the product handling, safety information, and all other
precautions before mounting, using, servicing, or inspecting the product. In these Instructions,
safety notices are divided into " Warning" and " Caution" according to the hazard level:
Warning : A warning notice with this symbol indicates that neglecting the suggested procedure
or practice could be fatal or result in serious personal injury.
Caution : A caution notice with this symbol indicates that neglecting the suggested procedure or
Key optional
practice could result in moderate or slight personal injury and/or property damage.
"B"
for Right power
supply type
Handle installation positions
C
for Upper power
supply type
a
Mounting direction
C
b
b
a
Handle installation
positions
Standard
Note that failing to observe caution notices could result in serious injury/damage in some situations.
Because safety notices contain important information, be sure to read and observe them.
Applicable breaker types
, PH400- , PH630- ,
Never touch live terminals. Doing so may result in electric shock.
Electrical work should only be undertaken by suitably qualified persons.
Prior to commencing any work on the product, open an upstream circuit breaker or isolator
to ensure that no voltage is applied to the product. Otherwise, electrical shock may result.
No.2
To remain the switchboard panel closed securely, use appropriate hardware in addition to
the panel lock of the handle. Using the panel lock only may result in damage to the
switchboard panel.
When the breaker trips open automatically, remove the cause, then return the handle to
the |(ON) position. Should a fault be interrupted, the breaker must be inspected.
Otherwise, a fire may result.
Do not apply excessive force to the operating knob. Otherwise, damage may occur.
Visually check the inside from the handle catch to see if the handle is engaged with
the gear properly. See the table below.
Referring to the table below, install the handle in the
position matched to the change in breaker mounting
Mounting direction
direction.
Handle and gear
engagement
for Left power for Right power
supply type supply type
Warning
Operation Precautions
Caution
Installation Precautions
OFF
Operation Precautions
ON
Handle and gear engagement
for Upper power for Left power for Right power
supply type supply type supply type
Standard
1.5 - 2.0N m No.2