Ebod Module - IBM 1269-3S2 Installation, Service And User Manual

IBM System Storage DCS9900 1269-3S2 Storage Expansion Unit Installation, Service, and User Guide

4.8.2 EBOD Module

Please refer to section
EBOD module.
4.8.2.1 Removing the EBOD Module
Warning Do not remove this module unless a replacement can be immediately added. The system must not
be run without all units in place.
1 Using two hands, grasp each latch between the thumb and forefinger of each hand. Squeeze thumb and
forefinger together to release the latch. Pull the latches forward to cam the module out of the enclosure
(Figure
2 Grip the latch handles and withdraw the module
Figure 4–5
44
2.6, "EBOD Module Installation", on page 21
4–7).
Removing an EBOD Module (1)
for full information on installing the
(Figure 4–5).