Table of Contents
Advertisement
2. Use the
button to reset the power level
to 0 (zero).
• Hold the
least 2 seconds to switch off all
cooking zones at the same time.
• A zone can be switched off quickly
by pressing the
at the same time.
If a vessel not suitable for induction cooking is
used on an active zone or there is no vessel, the
zone will not deliver power and its display will
show the
symbol alternating with the power
level number.
Power level table
The power in the cooking zones can be
adjusted to various levels. In the table below
you will find instructions for the different types of
cooking.
Power level
0
Cooking small amounts of food
from 1 to 2
from 3 to 4
Cooking large quantities of food,
from 5 to 6
from 7 to 8
Roasting, slow frying with flour
9
Bring a large amount of water to
P
the boil (maximum power, see
Booster function
See General safety instructions.
The Booster function allows you to heat a pan at
maximum power for a limited amount of time. It
can be used to bring a large amount of water to
the boil rapidly.
After selecting a zone:
1. Set the power level to 9.
91477A679/A
button down for at
and
buttons
Suitable for:
OFF setting
(minimum power)
Cooking
roasting larger portions
Roasting
"Booster function")
2. Press the
button again; the
The Booster function remains active for
a maximum of 10 minutes, after which
the power level of the zone returns to 9.
will be shown on the display.
To deactivate the Booster function, simply
decrease the power level of the cooking zone
or switch off the appliance.
Timed cooking
This function is used to program the automatic
switch-off of each cooking zone at the end of a
period of time set by the user (from 1 to 99
minutes).
To set a timed cooking:
1. Place a pan on a cooking zone and select
a power level for a zone.
2. Select the relative cooking zone.
3. Press the
and
4. The
symbol will appear on the display
of the zone selected.
5. The flashing symbol
the rear zone buttons.
6. Use the
and
required time; press and hold to advance
more quickly.
7. Press the
and
time to cancel the function.
This function can be activated on
multiple cooking zones at the same
time.
The time can be changed at any
moment by following the above
procedure.
The timer cannot be activated if the
power level of the selected cooking
zone is zero (0).
symbol
buttons together.
appears between
buttons to select the
buttons at the same
USE - 11
Advertisement
Table of Contents
