Page 1
INSTALLATION MANUAL IC-205 Image Controller Applied Machine: for Product Code 4034/4035 NOTE • Before installing, be sure to unplug the power cord of the machine. • Keep all packing materials out of the reach of children. 4034-7183-01 91264C119H017...
Page 2
IC-205 I Unpacking I If this option is set up together with FK-505, EM-101/EM-102, NC-502, Check that the following accessories are available in the box. and SU-502 as a system, carry out the installation procedures in the following order. 1. Image Controller Board ................. 1 2.
Page 3
IC-205 I Installing the Image Controller Board 5. Connect the hookup harness connector, 1. Remove the Rear Cover. (nine screws) which has been disconnected, to the connector (P303) of the Image Controller P303 Board. 4508U007AA 4048U006AB 6. Reinstall the Rear Cover. (nine screws) 2.