Husky HPRO63TLOCKERBL Use And Care Manual page 6

2
Attach the Top Lockers to the Hutch & Side Locker.
□
Open the Top Locker door.
□
Attach the Top Locker (A) using 4 pcs M8*60 flat bolts (AA) and 4 pcs washers (BB) with supplied Hex Key (DD) or
Hex Bit (HH) in the 4 corners.
□
Do not tighten bolts until both lockers are attached and flush.
□
Remove the 2 Side handles (B) from the Top Locker (A) and repeat Step 1 and 2 for the 2nd Top Locker installation.
AA
□
Once both Top Lockers are attached and the front and top edges are flush with the existing Hutch and Side Lockers,
then tighten all 8 bolts (AA). Be careful not to overtighten.
□
The Husky® Logo badge (C) is magnetic and can be moved to either side of the Top Locker.
□
If desired, the 2 Side Handles (B) can be attached to the ends of the Top Lockers, or removed.
BB
6
AA
BB