Device Installation - Supermicro X13SAE Quick Reference Manual

X13SAE/X13SAE-F QUICK REFERENCE GUIDE
This motherboard has three PCIe 4.0 M.2
M-key sockets that support the M.2 2280
module. One standoff is pre-installed into
the position of 2280 mounting hole. Refer
to the illustration on the right for the loca-
tions of M.2 sockets and mounting holes.
Follow the steps below to install the M.2
device.
1. Locate the pre-installed standoff and
screw. Remove the screw and set it
aside.
2. Carefully insert the M.2 device into
the M.2 socket and lower the semi-
circle notched end onto the standoff.
3. Tighten the standoff screw to secure
the M.2 device into place. Do not
overtighten so as to avoid damaging
the M.2 device.
M.2 Device Installation Instructions
M.2 Device Installation
M.2 Device Installation Instructions
BMC
2280
BIOS LICENSE
X13SAE-F
REV:1.00
DESIGNED IN USA
2280
2280
DIMMA1
DIMMA2
DIMMB1
DIMMB2
PCH