Chapter 2: Basic Operations; Turning On Phone; Turning Off Phone; Standby Mode - NEC DigitalTalk MAX 2100 Owner's Manual

Nec max 2100: owners manual
Table of Contents

Advertisement

Chapter 2: Basic Operations

Turning On Phone

P
Press and hold the
turn on the phone.
The cellular signal strength indicator, the battery charge indica-
tor, the time, the date, and the cellular service provider indicator
appear on the display. (See "Display Icons" on page 3.)
! ,
1 2 : 0 0 am
J an
S E

Turning Off Phone

P
Press and hold the
turn off the phone.

Standby Mode

Once the phone is powered on, the phone enters the standby
mode. (The above screen illustration depicts the phone in
standby mode.) The standby mode remains displayed until a call
is placed or received, a menu is accessed, or the phone is pow-
ered off.

Signal Strength

The cellular signal is indicated on the display as
maximum of six bars indicating a strong signal. Although you
can use the phone without extending the phone antenna,
extending the antenna can increase the strength of the received
cellular signal.

Battery Charge Indicator

The battery charge indicator (
battery. When the battery charge drops to a low level, the phone
displays the following warning message:
RECHARGE BATTERY
While displaying the recharge notification, the phone also
sounds a double beep up to six times at 10-second intervals.
The phone then automatically powers off. See "Charging the
Battery" on page 2.
key for approximately two seconds to
;(
+
0 1
V I C E
R
key for approximately two seconds to
;(
+
) shows the charge level of the
5
-
-
with the

Advertisement

Table of Contents
loading

Table of Contents