Table of Contents
Advertisement
Getting Started
Preparing the phone
Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card is inserted and the battery is charged.
SIM card
Before using your phone, you must sign-up with one of the digital network service providers. In addition to your subscription details you will receive a
personal SIM (Subscriber Identity Module) card which is inserted into your phone.
If the SIM card is removed, the phone becomes unusable until a valid SIM card is fitted. It is possible to transfer your SIM card to another compatible
phone and resume your network subscription. The screen on your phone will display appropriate messages if no SIM card is fitted.
If the phone, or the SIM card, is lost or stolen then you should contact your service provider immediately in order to bar it from use.
The phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.
The digital technology of your phone helps to ensure that your conversations are kept secure.
The SIM card contains personal data such as your electronic phonebook, messages (see "Message (M2)" on page 28) and also details of the network
services you have subscribed to. The phone will not work (except for emergency calls on some networks) unless a valid SIM card is fitted.
Be sure to turn the phone off before inserting and removing a SIM card. Otherwise damage to the SIM card can occur.
Inserting a SIM card
Be sure to turn the phone off before removing the battery pack.
☛
While pressing down the areas marked with
arrow ➁ with your finger tip. Then, lift the cover up in the direction of arrow ➂ to remove it.
☛
Lift the finger tab of the battery pack up in the direction of arrow ➃. Then lift the battery pack out in the direction of arrow ➄.
☛
With the metal part facing down, insert the straight end of the SIM card under the holder in the direction of arrow ➅. Slide the SIM card all the way
until it reaches the end.
Be careful not to damage electric parts of the SIM holder when inserting a SIM card.
☛
Insert the two tabs on the battery pack into the slots on the phone in the direction of arrow ➇, making sure that the tabs on the battery pack fit
properly into the slots on the phone. Then, press the battery pack down in the direction of arrow ➈ to clip it into the phone.
☛
Make sure that the battery pack is securely attached to the phone and align the rear cover with the grooves on the phone so that there is a gap
of about 3 mm at the end of the cover. After making sure that there is no gap between the rear cover and the phone body, slide the rear cover in
the direction of arrow ➉ until you hear a click.
of the rear cover as indicated by arrow ➀, slide the rear cover about 3 mm in the direction of
1
Getting Started
Advertisement
Table of Contents
