PYRAMID TIMETRAX BIO ETHERNET QUICK START GUIDE QUICK START GUIDE Pyramid TimeTrax Bio ETHERNET MODEL SOFTWARE MUST BE FULLY INSTALLED PRIOR TO CONNECTING ANY TERMINAL CABLES MINIMUM SYSTEM WHAT’S IN THE BOX? REQUIREMENTS • Pyramid TimeTrax time recorder • DHCP Server on the Network Ethernet Network Jack •...
PYRAMID TIMETRAX BIO ETHERNET QUICK START GUIDE INSTALLING THE SOFTWARE NOTE: Prior to installing the software, it is recommended that you disable all anti-virus and firewall software so it does not interfere with the installation. It can be turned back on immediately after the installation.
FINISH and Restart your computer. You are now finished installing the Pyramid TimeTrax software onto your PC. We highly recommend restarting your computer before you proceed. NOTE: Do not continue using the software until the terminal(s) is completely connected with all cables and power supply.
TERMINAL MOUNTING The Pyramid TimeTrax Bio is designed to sit on a desk, shelf or table. An optional terminal wall bracket (item # 42158) can be purchased from the supplier you bought the terminal from. You can also purchase the bracket from Pyramid direct at www.ptitime.com or by calling (888) 479-7264.
Click the “Reference Guide” ICON to open the electronic PDF file of the Software Users Guide. You will see complete steps and full directions on how to use the Pyramid TimeTrax Software. The guide is always available on the software screen toolbar. In addition, you can print this file out or save it to your PCs hard drive.