Epson KDS Multi Station Quick Start Manual page 4

2. Setting Up a Multi-Station KDS System
Please follow the steps in order to setup and configure your Multi Station KDS:
1. Unpack your printer and connect the AC Adapter to the back of the printer and a power outlet.
2. Connect an ethernet cable from the PC/laptop to the router/network switch.
Note: If your laptop is connected wirelessly to the same network as the printer you do not need
to connect the ethernet cable from the laptop to the router/network switch.
Form: F-730-028 v1.00
Picture 2.1
KDS Multi Station
Quick Start Guide
Page 4 of 26
111-38-URM-003
R2.30