Advertisement
2. After logging in for the first time you will be presented with the following options:
Click Configure the system for the first time and then click Next.
Note: Running the Configuration utility subsequent times will not start with the above
Wizard. Please consult Appendix B for instructions on restarting the Setup Wizard.
3. Select your POS system from the list and click Next:
Note: If your POS does not appear in the list, you will need to contact your Reseller for
guidance.
Form: F-730-028 v1.00
Picture 4.2
Picture 4.3
KDS Multi Station
Quick Start Guide
Page 12 of 26
111-38-URM-003
R2.30
Advertisement
