Epson WF-5690 Series Service Manual page 45

Epson WF-5690/4640/4630/5620/5190/5110series
*
Paper Stopper Assy 2nd
2nd Cassette Unit Paper Stopper Assy 2nd
Dowel and positioning hole
C.B.P-TITE SCREW 3x8 F/ZN-3C (6 ± 1 kgf·cm)
When installing the
Paper Stopper Assy 2nd, align the
positioning holes (x2) of the Paper Stopper Assy 2nd with the
dowels (x2) of the 2nd Cassette Unit, and tighten the screws (x2).
Disassembly/Reassembly
2nd Cassette Cover Left*
Rear
2nd Cassette Cover Left
2nd Cassette
Cross-section
Cover Left
Hook
C.B.P-TITE SCREW 3x10 F/ZN-3C (6 ± 1 kgf·cm)
When releasing the hooks (x3) of the 2nd Cassette Cover Left, release
them in the order from the front side to the rear side of the printer by
inserting a screw driver or the like into the holes of the 2nd Cassette
Cover Left and then pushing the hooks in the direction of the arrow.
The above figure shows the kind and position of screw.
Detailed Disassembly/Reassembly Procedure for each Part/Unit
2nd Cassette Cover Right
Front
2nd Cassette Cover Right
Front
Cross-section
Hole
C.B.P-TITE SCREW 3x10 F/ZN-3C (6 ± 1 kgf·cm)
When releasing the hooks (x3) of the 2nd Cassette Cover Right, release
them in the order from the front side to the rear side of the printer by
inserting a screw driver or the like into the holes of the 2nd Cassette
Cover Right and then pushing the hooks in the direction of the arrow.
The above figure shows the kind and position of screw.
* Frame Pickup Assy
Rear
2nd Cassette Housing Assy
2nd Cassette
Cover Right
Hook
Hole
C.B.P-TITE SCREW 3x10 F/ZN-3C (6 ± 1 kgf·cm)
 When installing the Frame Pickup Assy to the 2nd Cassette
Housing Assy, align the positioning holes (x2) of the Frame
Pickup Assy with the dowels (x2) of the 2nd Cassette Housing
Assy
 The above figure shows the kind and position of screw.
Revision D
Frame Pickup Assy
Dowel and positioning hole
45
Confidential