Husqvarna R 318X Operator's Manual page 111

Problem
There is vibration in the product
The cutting result is unsatisfacto-
ry
Display - Troubleshooting
Symbol
838 - 010 - 15.03.2022
Cause
The blades are loose. See
One or more of the blades are unbalanced. See
107 .
The engine is loose.
The blades are blunt. See
The grass is long or wet. See
The cutting deck is skew.
There is grass blockage in the cutting deck. See
100 .
The tire pressure is different on the right and left sides. See
page 104 .
The product is operated at a too high speed. See
page 97 .
The engine speed is too low. See
The drive belt slips.
Name
Slope indicator
Oil pressure sensor
Battery level indicator The symbol shows.
Rotating blades indi-
cator
Parking brake indica-
tor
To examine the blades on page 107 .
To examine the blades on page 107 .
To get a good cutting result on page 97 .
To get a good cutting result on page 97 .
Indication on the dis-
play
The symbol shows.
The symbol flashes.
The symbol shows.
The symbol shows.
The symbol flashes.
The symbol shows.
The symbol flashes.
The symbol flashes
quickly.
To examine the blades on page
To clean the product on page
To get a good cutting result on
Sound Cause
You operate the product in a
- slope >10°. Refer to
on slopes on page 91 .
You operate the product in a
slope >15°. Refer to
-
structions for operation on page
89 .
Low oil pressure. Refer to
1 long
a check of the engine oil level on
sound.
page 107 .
1 long Low voltage. Refer to
the battery on page 103 .
sound.
The drive of the blades is engag-
ed.
-
Incorrect start procedure. Refer
Start conditions on page 90 .
to
The parking brake engaged. Re-
Parking brake on page 90 .
fer to
Incorrect start procedure. Refer
Start conditions on page 90 .
- to
Defective parking brake. Speak
to your Husqvarna servicing
dealer.
Tire pressure on
To cut grass
Safety in-
To do
To charge
111