NEC MultiSync LCD1990SXi User Manual page 20

Advanced OSM Controls -
Tag 3 AUTO ADJUST
LEVEL
(Analog input only)
A-NTAA SW
(Analog input only)
Determines which items are to be adjusted when the AUTO
ADJUST function is activated.
The choices are "SIMPLE" "FULL", and "DETAIL".
Press "Left" or "Right" to select.
Size, Fine,
Position
SIMPLE O
FULL O
DETAIL* O
O: Automatic Adjustment X: No Automatic Adjustment
* "DETAIL" activates automatic long cable (skew, peaking) adjustment.
** Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the
Long Cable Software. To download the software, please visit www.necdisplay.com.
Determines when the Advanced No Touch Auto Adjust function
will activate.
OFF: Monitor does not use Advanced No Touch Auto Adjust.
ON: Advanced No Touch Auto Adjust occurs during power on
or when a change in the input signal is detected.
OPTION: Decreases the time it takes for the monitor to perform
an automatic adjustment, but some signal problems may not be
detected when the signal changes.
8
continued
Contrast Black Level, Long
Cable capability**
X X
O X
O O
Time
 Sec.
.5 Sec.
5 Sec.