Specifications - NEC MultiSync 55 User Manual

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
15500411.wpc
MultiSync ® 55
Monitor
Diagonal: 15 inch
13.8 inch
Radius: 1080 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Unlimited number of Colors
31 kHz to 70 kHz
Vertical: 55 Hz to 120 Hz
640 x 480 @ 60 to 120 Hz
800 x 600 @ 55 to 110 Hz
832 x 624 @ 55 to 106 Hz
1024 x 768 @ 55 to 87 Hz ....................... NEC cites recommended resolution at
1152 x 875 @ 55 to 77 Hz
1280 x 1024 @ 55 to 66 Hz
275 mm/10.6 inches
Vertical: 203 mm/8 inches
280 mm/11 inches
210 mm/8.3 inches
AC 100 – 240V, 55/60 Hz
1.5A @ 100 – 240V
360 mm (W) x 380 mm (H) x 381 mm (D)
14.2 inches (W) x 14.9 inches (H) x 15.0 inches (D)
12.1 kg
26.7 lbs
0 C to +35 C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20 C to +60 C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
11
13
™ Notes
90 deflection, 0.28 mm trio dot pitch,
medium short persistence phosphor,
multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear ® screen surface.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
85 Hz for optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
11/23/99, 7:57 AM