La Crosse Technology WS6205 Instruction Manual page 12

button to adjust the brightness of the backlight, you can adjust the 5 state: 4 different brightness backlight
and close the backlight. Users can choose according to the personal preferences of different brightness
backlight or turn off the backlight. Turn off backlight when you can touch the "
the backlight 15 seconds.
 The weather station can also set the backlight to automatically dim at night. Press and hold the "
button for more than 2 seconds to enter the night mode setting. First, turn the night function on or off, the
night function icon "
close (OFF).
Note: when the night function is set off, press "
other items
 Press " " button to confirm your setting, switch to the brightness setting of the backlight change after
entering the night. Now use "+" and "-" buttons set the brightness required for the backlight change after
entering the night
 Press "
" button to confirm your setting, switch to the hour of enter night mode setting. Now use "+" and
"-" buttons set the required hour
 Press " " button to confirm your setting, switch to the minute t of enter night mode setting. Now use "+"
and "-" buttons set the required minute
 Press " " button to confirm your setting, switch to the hour of exit night mode setting. Now use "+" and
"-"buttons set the required hour
 Press " " button to confirm your setting, switch to the minute of exit night mode setting. Now use "+"
and "-" buttons set the required minute
 Press " " button to confirm your setting and to end the setting procedure.
 When the night mode is on, the icon "
night mode, the backlight will automatically switch to the set night mode brightness, and when the time
reaches the time to exit the night mode, the backlight will return to the original brightness.
 In night mode, the backlight can be switched to the highest brightness for 15 seconds by touching the
" " field
F.Y.I.:
 During the reception of the time radio wave signal, the backlight will be automatically closed to prevent the
interference of the radio wave.
WS6205 Instruction Manual
" displayed. Now use "+" and "-" buttons set the night function to activate (ON) or
" will be displayed. When the time reaches the time to enter the
" button to exit directly, omitting the settings of
" field to light
"