Special Playback; Automatic Power Off Function; Skipping Tracks And Indexes; Scanning At High Speed (Sacd/Cd) - NAD M5 Owner's Manual

Operation

SPECIAL PLAYBACK

AUTOMATIC POWER OFF FUNCTION

The M5 can be powered to standby by the 12V-TRIGGER IN. Also, the M5 will automatically turn itself
to standby mode after the Screen Saver has been engaged for about 8 minutes.
STOPPING PLAY
Press STOP during playback either on the remote or the M5.

SKIPPING TRACKS AND INDEXES

SKIPPING FORWARD
Press or during playback. A track or index is skipped each time the button is pressed.
SKIPPING BACK
Press or during playback. When the button is pressed once midway through a track or index, the
player returns to the start of that track or index. When or is pressed again, track or index is skipped
each time the button is pressed.
SCANNING AT HIGH SPEED (CD, SACD)
You can play back discs at various speeds. To scan at fast-forward or fast-reverse during playback, press
the Scan buttons , or during playback
The speed of advance (reverse) is relatively slow at first. When the button is pressed again, the speed
becomes faster. (Each time the button is pressed, the speed increases up to 5 steps for CD). The speed
will be retained even after the button is released. To return to normal playback, press PLAY
NOTES
• The CD/SACD player does not play back sound during the high-speed reverse and forward playback.
• Not all media support maximum speeds for scanning.

REPEAT

Press REPEAT during playback. Each time this button is pressed, the TV screen changes as shown below
and the disc will repeat a track.
SACD/CD/MP3/WMA
Repeat of track being played.
Repeat of disc being played.
Cancel repeat mode (normal play).
TO PROGRAM REPEAT PLAY (CD/SACD)
If REPEAT is pressed during program play, repeat play is operated as below.
Repeat of the current programmed track
Repeat of all programs
Cancel repeat mode by pressing the REPEAT button several times until REPEAT OFF is displayed
11