Parental Control Setup Menu - NAD T585 Owner's Manual

OPERATION
uSing the t 585 – Setup menu
xover (croSSover) frequencY
Set the frequency level where bass redirection starts. Frequencies below
the set level are redirected to the subwoofer while those above are not
redirected. Crossover frequency can be set from 80Hz up to a maximum of
150Hz; it is applicable only to SUBWOOFER.
teSt
Select ON to test the signal of each speaker. Adjust the volume to match
the volume of test signals memorized in the system. You can adjust the
volume while operating the test tone - use [
Volume or Speaker option then use [
adjust volume level. If you adjust the volume while operating the test tone,
the test tone will be held paused in the current speaker channel.
return
Press to go back to the previous menu screen.
maSter volume
Adjust the audio output level of the T 585 from -50dB up to a maximum of
0dB.
downmix
Downmix allows you to enjoy a 5.1 or 7.1 channel media regardless of how
many speakers you have. In Downmix, the analog stereo output could be
processed into two different types of stereo Downmix.
lt/rt: Surround-compatible Downmix known as Left-total/Right-total,
also known as Lt/Rt. This is a multi-channel source suitable for Dolby
Pro Logic II, Dolby Pro Logic IIx, or other matrix decoding. The Lt/Rt
Downmix sums up all the Surround channels, attenuates them by 3
dB and adds them out-of-phase to the Left Front speaker channel and
in-phase to the Right Front speaker channel. This allows a home theater
decoder to produce Front Left, Center, Front Right, Surround Left and
Surround Right as well as Surround Back Left and Right channels.
Stereo: Stereo Downmix is suitable for playback on a two-channel
stereo system or on headphones. Stereo Downmix adds the Center, Left
Surround, and Right Surround channels discretely to the Stereo Left and
Stereo Right speaker channels. This preserves correct stereo separation
for stereo-only listening.
off: Audio content will not be subjected to downmixing.
dYnamic range control (drc)
With the DVD format, you can hear a program's soundtrack in the most
accurate and realistic presentation possible, thanks to digital audio
technology. However, you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds and the quietest
ones).
on: The ON setting is for late-night sessions or other times when you
wish to retain maximum dialog intelligibility while minimizing overall
volume levels. This is applicable only for Dolby Digital soundtracks.
off: To maintain full dynamic range, set to OFF.
teSt tone
A test tone can be enabled to help you check out availability of 5.1 channel
audio OUT and related connections.
on: Test tone automatically cycles through each channel.
off: Stop test tone cycle.
If you do not hear the test tone, check your line and speaker connections or
5.1 SPEAKER SETUP configurations.
1
] buttons to select
] buttons to select speaker or

PARENTAL CONTROL SETUP MENU

Some movies contain scenes that may not be suitable for children to view.
Many of these discs contain parental control information that applies to the
complete disc or to certain scenes on the disc. Movies and scenes are rated
from 1 to 8, depending on the country. Some discs offer more suitable
scenes as an alternative.
rating (north america verSion onlY)
The RATING feature allows you to block access to scenes greater than the
rating you have set up, thereby preventing your children from being able
to view material you believe is unsuitable. To activate "Rating", please be
guided by the following:
1 While at "Rating" line menu, press [ENTER].
2 "Password _ _ _ _" will appear indicating that a password is needed to
change the ratings level.
3 Input the password you have setup at the "Password" as discussed
below. Press [ENTER].
4 Upon entering the correct password, you can now set the parental
rating level you prefer. Use [
5 Press [ENTER] to select and save the rating level you have chosen.
rating 1-8
Rating one (1) has the most restrictions and "8" is the least restrictive.
unlock
If you select unlock, parental lock is not active and the disc plays in full.
NOTE
Should you forget your password, reset your password by restoring the
T 585 to its factory default settings. See "RESTORE SETTINGS" below on
how to reset the T 585 to its factory default settings.
countrY code
Enter the code of the country/area whose standards were used to rate the
DVD video disc.
1 While at "Country Code" line menu, press [ENTER].
2 "Password _ _ _ _" will appear indicating that a password is needed to
change the ratings level.
3 Input the password you have setup at the "Password" as discussed
below. Press [ENTER].
4 Upon entering the correct password, you can now set the Country
Code.
5 Use [ ] to select the first character. Press [
character.
6 Use [ ] to select the second character. Press [ENTER] to finalize and
save the selected country code.
] to step through the rating levels.
] to go to the second