NAD 317 Owner's Manual page 38

SPECIFICATION - NAD 317 STEREO INTEGRATED AMPLIFIER
POWER AMPLIFIER
CONTINUOUS AVERAGE POWER OUTPUT INTO 8
(Min. power per channel, 20Hz-20kHz, both channels driven, with no
more than rated distortion)
Rated distortion (THD 20Hz-20kHz)
Clipping power (maximum continuous power per channel)
IHF dynamic headroom at 8
IHF dynamic power
(maximum short term power/channel)
Slew rate
Damping factor (ref. 8 50Hz)
Input impedance
Input impedance
Input sensitivity (for rated power into 8 )
Voltage gain
Frequency response 20Hz-20kHz
Signal/Noise ratio, A weighted
Bridged (Monophonic) Mode
CONTINUOUS AVERAGE POWER OUTPUT INTO 8
(Min. power, 20Hz-20kHz, with no more than rated distortion)
IHF dynamic headroom at 8
IHF dynamic power
PREAMPLIFIER SECTION
Line Level Inputs
(CD,Video,Tuner,Tape 1, Tape 2, Aux)
Input impedance (R and C)
Input sensitivity
Signal/Noise ratio, A-weighted
Frequency response, 20Hz-20kHz
Voltage gain
THD + SMPTE + IHF I.M.
Line Level Outputs
Output impedance
Maximum output level
Controls
Treble
Bass
Physical Specifications
Dimensions in mm (Width x Height x Depth)
Net Weight
Shipping Weight
NAD
38
80W (19dBW)
0.03%
105W
+1$8 dB
8 110W (20.4dBW)
4 180W (22.6dBW)
2 250W (24dBW)
>60V/sec
200
60k + 500pF
0.9V
x 28.3 (29dB)
±0.2dB
-3dB 2Hz/100kHz
ref. 1W 98dB
ref. rated power 119dB
0.03%
240W (23.8dB)
+1.8dB
8 360W (25.6dBW)
4 500W (27dBW)
20 k + 450 pF
ref.0.5V 80 mV
ref. 1W 98dB
+0.2dB
16dB
<0.02%
Pre out 220
Tape Source Z + 2k
Headphones 120
Pre out >12V
Tape >10V
Phones >8V into 600
>250mW into 8
±7 dB at 10 kHz
±10 dB at 50 Hz
435 x 120 x 280
12kg
13.6kg