Operation; Connecting To A Power Source; Using The Nozzles - Toro 51619 Operator's Manual

Operation

Important: This blower is intended for outdoor,
residential use only. Do not use it indoors or for
commercial or industrial purposes. This appliance is for
household use only.

Connecting to a Power Source

To reduce the risk of electric shock, this appliance has a polarized
plug (i.e., one blade is wider than the other). Use only a polarized,
UL listed (CSA certified in Canada) extension cord recommended
for outdoor use. A polarized plug will fit in a polarized cord only
one way. If the plug does not fit fully in the cord, reverse the cord.
If it still does not fit, purchase a polarized extension cord. If you
have a polarized extension cord and the extension cord plug does
not fit fully into the wall receptacle, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. Do
not change the appliance or extension cord plug in any way.
Use only an extension cord recommended for outdoor use.
WARNING
If you do not fully seat the extension cord on the
inlet plug, or if the plug and cord do not fit firmly, the
loose plug could lead to overheating and cause a fire,
possibly burning you or others.
•
Ensure that you fully seat the cord on the plug.
•
Check the connection regularly to ensure that the
cord is firmly attached.
•
Do not use a worn-out or loose extension cord.
Extension Cord Length
100 ft
150 ft
Note: Do not use an extension cord over 150 feet.
Important: Check the extension cord frequently during
use for holes in the insulation. Do not use a damaged
cord. Do not run the cord through standing water or
wet grass.
Secure the extension cord to the blower using the molded in
cord-lock feature.
Minimum Wire Gage
(A.W.G.)
14
12
Starting/Stopping/Adjusting
the Air Speed

Using the Nozzles

Install the power and concentrator nozzles into the blower tube to
help reach into narrow spaces or to remove matted debris from
hard surfaces.
1. Blower tube
2. Power Nozzle
4
3. Concentrator nozzle
4. Cord wrap