Safety And Instructional Decals - Toro 51619 Operator's Manual

SAVE THESE
INSTRUCTIONS

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged or lost decals.
Setup
Register your product at www.Toro.com to ensure that Toro can
notify you in the case of a safety or warranty product recall.
Assembling the Blower
Important: The blower will not run unless the bottom
inlet cover is locked in place.
127–2265
Converting from Blower to
Vacuum
WARNING
The impeller rotates for a few seconds after you turn
off the blower and can cut or injure fingers.
Do not remove the bottom inlet cover when the motor is
running or when the unit is plugged into a power outlet.
1. Remove the inlet cover and the blower tube.
2. Install the vacuum tube and bag.
Important: The vacuum will not run unless the
vacuum tube is locked in place.
2