2-10 Sata Connections; S-Sata 3.0 Ports - Supermicro X10DSN-TS User Manual

Super X10DSN-TS Motherboard User's Manual

2-10 SATA Connections

S-SATA 3.0 Ports

Two S-SATA 3.0 ports (S-SATA0/S-SATA1), supported by the Intel PCH chip,
are located on the motherboard. These SATA ports are used with Supermicro
SuperDOM (Disk-on-Module) connectors, which are yellow SATA connectors with
power-pins built-in, and are backward-compatible with regular SATA HDDs and
SATA DOMs. All SATA ports provide serial-link signal connections, which are faster
than the connections of Parallel ATA.
Note 1
power pins built-in and do not require separate external power cables.
These connectors are backward-compatible with non-Supermicro SATA-
DOMs that require an external power supply.
Note 2: For more information on the SATA HostRAID configuration, please
refer to the Intel SATA HostRAID user's guide posted on our website @
http://www.supermicro.com.
SXB1
LAN1 LAN2
LAN CTRL
CPU2_PORT1B
CPU2_PORT1A
FAN2
CPU2_PORT2D
CPU2_PORT2C
BMC
CPU2_PORT2B
CPU2_PORT2A
JSLOT1
CPU2
GU2
PM1 PM2
AM1 AM3
:
Supermicro SuperDOMs are yellow SATADOM connectors with
VGA
JSIOM
X10DSN-TS
Battery
Rev. 1.00
BIOS
MAC CODE
LICENSE
SAN MAC
IPMI CODE
BAR CODE
CPU1
1
AM2 AM5
USB0/1(3.0)
(Reserved)
JTPM1
B
JBT1
PCH
A
1
GU1
AM4
2-26
A. S-SATA0
B. S-SATA1