Lenovo ThinkBook 14p Gen 3 Hardware Maintenance Manual page 59

"Remove the LCD bezel" on page 49
"Remove the hinge cover" on page 49
"Remove the LCD panel" on page 50
Step 1. Remove three screws and then remove the left hinge. Disconnect the camera cable from the
camera board and disconnect the sensor board cable from the sensor board. Then, remove the
EDP cable.
Figure 37. Remove the EDP cable
Screw specifications
M2 × L2
Step 2. Remove the OLED panel AL foil.
Note: The OLED panel AL foil is only for OLED panel.
Number of screws
3
.
Chapter 4 Removing a FRU or CRU
53