Lenovo ThinkBook 14p Gen 3 Hardware Maintenance Manual page 41

Step 1. Disconnect the battery cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2. Peel off the foil.
Figure 12. Lift the foil
Step 3. Remove three screws and remove the USB bracket.
Figure 13. Remove three screws and the USB bracket
Screw specifications
M2 × L4
M2.5 × L4
Number of screws
2
1
.
Chapter 4 Removing a FRU or CRU
35